Tag Archives: swags

My mother and sister came up and helped me make some drapes for my bedroom. Consequently, I’ve spent the past week or so thinking about the geometry of swags, that pit of cloth with drooping folds that conceals the hardware of the curtains. Since light keeps me awake, and my neighbors can see in my window, I wanted to put up fairly elaborate drapes for entirely practical reasons. The aesthetic side of me required that it all be topped off by a valence. When I get my stuff together I might put together a how-to for drapes, curtains and the valence, which was my own design.

For now, though, I’m going talk about making swags. (I know that I’m primarily a painter, but on several occasions clients have asked me to make draperies as well. Furthermore, I’ve made them for my mother and sister, so I have a moderate amount of experience making window treatments.)

Now, the shape of a swag is like that of a chain, wire or rope hung from two points. In other words, the curve of the draping of a swag is a catenary (or an approximation of one), which, in my opinion, is one of the world’s most beautiful shapes. So, the bottom line of a swag, when the cloth is unfolded and laid out, is the length of the catenary most closely resembling the desired swag. It it tempting to want to use math to figure out that length. Certainly this is doable, but to be honest, it is far easier to simply hang a tape measure or some rope and measure the length. If anyone has done this mathematically, I would love to hear about it.


Okay, so now we know that we need a piece of fabric whose bottom width is equal to the width measured by the rope.

There are two type of swags, open swags and closed swags. My main experience until now has been with closed swags. I plan on making some open swags in the near future and will report on how that goes. For now, I’m discussing closed swags.

So, the width of the swag is probably given by the width of the window and the depth is often chosen because it looks “right.” That gives us the silhouette of the swag. Next, you have to figure out how many pleats you want and the size of the “picture.” The picture is the moon-shaped part of the fabric in the center top part of the swag. If you’re using a print fabric, it is important to consider what part of the print will appear in this area.

swag showing picture

Once you determine the size and shape of the picture, you can use the tape measure technique to find the length of the curve created by this fold. This will be the width of the fabric at this point.

swag showing top fold

beginning to draw patternNow, you have two widths, the width of the fabric at the bottom and the width of the fabric along the top fold. (We still haven’t allowed for hems or overlaps, so don’t get too excited yet. We still have lots of figuring to do.

Now, let’s think about how the swag would look in cross-section.

swag cross section

From here, I confess that I just guesstimate and use a number between double and one and two-thirds times the depth of the swag. So, now we have:

swag pattern 1

swag showing measurements


For the next dimensions, if you’re working out a full-sized pattern on paper, you can literally just draw the necessary lines,

swag pattern 2

otherwise, the math is easy enough.

swag pattern 3

Half the difference of the length of the top fold and the bottom, that’s the length of segment DE.

Half the difference of the width of the picture and the length of the top fold is the length of segment HF.


So, now we have a parallelogram.

swag pattern 4

The next thing we need to take into account are the overlaps. Take the width of the swag and subtract the width of the picture. Divide by two to get the width of all the pleats. Divide by the number of pleats to get the width of one pleat. Divide the length between the line indicating the top fold and the bottom by the number of folds.

swag showing folds

Don’t forget to include an allowance for the hem.

swag pattern 5

And this is how I make a swag.